Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the gearshift of the Fiat 500?

Model: Fiat 500 312 - Years 2007-2024
Part: Transmission

We will delve into how to disassemble and overhaul the five-speed manual gearbox of a Fiat 500. In this specific case, it involves replacing a bearing, but even if it were a different problem, the working method explained in this video guide is the same. For convenience, the car should be lifted on a workshop lift, then proceed with disassembling the gearbox, removing the gears, and finally removing the worn bearing(s). Once the new ones are installed, the intervention is completed by reassembling everything.

Posted on 13 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the storage compartment of the Fiat 500
How to disassemble the storage compartment of the Fiat 500
Fiat 500 (2007-2024 / 312) In this new guide of ours, we will discover together the necessary steps to easily disassemble the glove compartment located on the passenger side of…
How to disassemble the dashboard components of the Fiat 500
How to disassemble the dashboard components of the Fiat 500
Fiat 500 (2007-2024 / 312) In this guide we will see the instructions that will allow us to disassemble the main components of the Fiat 500 dashboard. First, we get on board th…
Disassembly of the Fiat 500 Engine
Disassembly of the Fiat 500 Engine
Fiat 500 (1957-1975 / Epoca) In this video tutorial, you will learn how to disassemble the components of a first series Fiat 500 engine. First, remove all the bolts from the oil …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos