Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Transmission Bearing on the Fiat 500?

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Bearing

See other generations:
Video tutorial

To replace the transmission bearing on the Fiat 500, you will need to completely remove the gearbox from its housing by undoing the screws that secure the gearbox to its housing and disconnecting the connectors as well: at this point, you can proceed to loosen the screws that secure the covers of the gearbox and locate the bearings inside.

The transmission bearing can be removed using a puller and then a new replacement part can be inserted; after the replacement, you can reassemble all the removed parts.


Updated on 13 August 2026 by ScegliAuto


Related tutorials

How do you disassemble the gearshift of the Fiat 500?
How do you disassemble the gearshift of the Fiat 500?
Fiat 500 (2007-2024 / 312) We will delve into how to disassemble and overhaul the five-speed manual gearbox of a Fiat 500. In this specific case, it involves replacing a bearin…
Where is the Crankshaft Position Sensor on a Fiat 500?
Where is the Crankshaft Position Sensor on a Fiat 500?
Fiat 500 (2007-2024 / 312) In this video, you will see where the crankshaft position sensor is located on a Fiat 500, useful in case you need to replace it, a task that is extr…
The Location of the Oil Filter on a Fiat 500X
The Location of the Oil Filter on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) The location of the oil filter on the Fiat 500X is typical for the 1.4 Turbo petrol (MultiAir) and 1.6 Diesel MultiJet engines. It is located in the …

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos