Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear wheel bearings in the Fiat 500?

Model: Fiat 500 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Bearing

See other generations:
Video tutorial

In this tutorial, you can see how to replace the rear wheel bearings in the Fiat 500, a relatively simple operation even if you do not have much experience. First, lift the side you will be working on with a jack, taking the appropriate safety measures.

Then, remove the wheel and undo the two bolts securing the brake caliper with a 13 mm spanner. Once this is done, pry off the aluminium cap using a flathead screwdriver and undo the large inner nut with a 32 mm socket.

At this point, you can extract the bearing, insert the replacement, and reassemble everything by following the reverse procedure.


Updated on 5 August 2026 by ScegliAuto


Related tutorials

How do you replace the rear brake pads of the Fiat 500?
How do you replace the rear brake pads of the Fiat 500?
Fiat 500 (2007-2023 / ) In order to replace the rear brake shoes of the Fiat 500, you need to lift the car so that the rear wheels are not in contact with the ground: once t…
How to Remove the Rear Bumper of a Fiat 500
How to Remove the Rear Bumper of a Fiat 500
Fiat 500 (2007-2021 / 312) Start by removing the six screws located inside the rear wheel arches of your Fiat 500. Next, open the boot and access the screws securing the rear l…
How to Lower the Front and Rear Seats on the Fiat 500
How to Lower the Front and Rear Seats on the Fiat 500
Fiat 500 (2007-2021 / 312) In this video tutorial, discover how to lower the front and rear seats on the Fiat 500 by following the instructions below. First, learn how to lower…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos