Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. 500
  6. : How to remove the differential unit on Fiat 500

Fiat 500 - Video tutorial

Model: Fiat 500 Epoca - Years 1957-1975
Part: Differential
Operation: How to remove the differential unit on Fiat 500

We see in this video how to disassemble the differential group on Fiat 500 cars. We use a screwdriver to remove (if necessary) to remove the sleeves, the boots and the flanges from the previously disassembled drive shaft, then, we block the differential with a vice to disassemble the pins placed on it. After removing the pins, let's open the differential by levering it with a screwdriver. Finally, we check the individual pieces (we replace the damaged ones), carefully clean them and assemble everything. We reassemble the piece with all the attached pieces on our car.


Posted on 21 October 2023 by ScegliAuto

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos