Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. Stilo
    4. : How to replace spark plugs on Fiat Stilo

Fiat Stilo - Video tutorial

Model: Fiat Stilo MK 1 - Years 2001-2010
Part: Spark plugs
Operation: How to replace spark plugs on Fiat Stilo

Let's see how to remove and replace the spark plugs on a Fiat Stilo: open the engine compartment, lift the front hood, put it in safety with the rod supplied. We remove the coils on the head of the engine with a screwdriver, immediately after, unscrew the spark plugs with a socket wrench, pull them out of the head. We take the new spark plugs and accompany them with the socket wrench extension in the engine head, tighten them and connect the power coils to each spark plug. Finally we close the bonnet and test the correct functioning of the same, starting the car.


Posted on 21 October 2023 by ScegliAuto



How do you replace the spark plugs on a Fiat Stilo?
Fiat Stilo (2001-2010 / MK 1) The replacement of the Fiat Stilo's spark plugs is done by opening the hood, so that the screws that secure the plastic cover of the top part of the
How do you replace the Fiat Stilo spark plugs?
Fiat Stilo (2001-2010 / MK 1) In order to replace the spark plugs on the Fiat Stilo, the bonnet must be opened and the engine compartment accessed, so that the top cover of the en
Remove the glow plugs from your Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) Do you want to remove the glow plugs of your Fiat Stilo and don't know how to do it? Let's see in this video how to precede the disassembly. We pull

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos