Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you change the language of the on-board computer of the Fiat Bravo?

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

See other generations:
Video tutorial

In order to change the language of the on-board computer of the Fiat Bravo, you need to connect a diagnostic tool to the OBD port of the vehicle: this can be found on the dashboard immediately below the steering column. Once the connection is made, you can select the specific car model and its corresponding version: then you need to follow the instructions in the tutorial to change the language of the on-board computer.

You can then disconnect the scanner and turn on the ignition to ensure that the change has been made.


Posted on 25 April 2025 by ScegliAuto


Related tutorials

Instructions for Removing the Radio/Onboard Computer from a Fiat Bravo
Instructions for Removing the Radio/Onboard Computer from a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this video, you will see the instructions for removing the original radio to replace it with a 2 DIN unit in a second series Fiat Bravo. First, ge…
Guide to Reset the Service Light on the Fiat Bravo 2
Guide to Reset the Service Light on the Fiat Bravo 2
Fiat Bravo (2007-2014 / Bravo 2) In this short and simple guide, discover how to reset the service light for the routine maintenance oil change on the Fiat Bravo second series. First…
Resetting the Service Light on a Fiat Bravo
Resetting the Service Light on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Learn how to reset the maintenance light on a Fiat Bravo. Enter the vehicle and turn on the instrument cluster. Press the accelerator pedal, then pre…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos