Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on a Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

Learn how to reset the maintenance light on a Fiat Bravo. Enter the vehicle and turn on the instrument cluster.

Press the accelerator pedal, then press the brake pedal seven times. Release the brake pedal, turn off the instrument cluster, and remove the key from the ignition.

Reinsert the key and turn on the instrument cluster, then wait for it to illuminate. Always remember to make changes to the onboard computer while the vehicle is stationary and turned off. Check the changes made to the car once the reset is complete.


Updated on 12 April 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on Fiat Bravo
How to Reset the Service Light on Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How to reset the maintenance light on Fiat Bravo? Open the car door, sit in the driver’s seat, and you will see a socket under the dashboard (below t…
How to Reset the Service Light on the Fiat Bravo?
How to Reset the Service Light on the Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) The procedure to reset the Service light on the instrument panel of the Fiat Bravo requires connecting a diagnostic tool to the vehicle's OBD port: o…
Reset the Service Light on Fiat Bravo
Reset the Service Light on Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Has the service light appeared on the instrument cluster of your Fiat Bravo? Let's reset it. Turn on the ignition, press the "Set" button located on …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos