Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years 2007-2014
Part: Service warning light

How to reset the maintenance light on Fiat Bravo? Open the car door, sit in the driver’s seat, and you will see a socket under the dashboard (below the steering wheel) where you can connect your tester. If you do not have the computer for the reset, perform the reset using the settings menu. Connect the mini PC to the connector and carry out the system check of the car. After all necessary checks to reset the car's maintenance light, disconnect the mini PC cable from the previously connected socket at the end of the reset. Check whether the light is on or off.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Reset the Service Light on the Fiat Bravo 2
Guide to Reset the Service Light on the Fiat Bravo 2
Fiat Bravo (2007-2014 / Bravo 2) In this short and simple guide, discover how to reset the service light for the routine maintenance oil change on the Fiat Bravo second series. First…
How to Reset the Service Light on the Fiat Bravo?
How to Reset the Service Light on the Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) To reset the service light on the Fiat Bravo, insert the key and turn it to switch on the ignition: this will cause the service light to appear on th…
How do you reset the Service light on the Fiat Bravo?
How do you reset the Service light on the Fiat Bravo?
Fiat Bravo (2007-2014 / Bravo 2) The procedure to reset the Service light that appears on the instrument panel of the Fiat Bravo involves connecting a diagnostic tool to the OBD port…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos