Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the battery sensor of the Fiat 500 1.2

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

In this guide we will see the instructions on how to reset the battery sensor of the Fiat 500 1.2. First of all, we open the engine hood and locate the positioning of the battery sensor, located next to the upper clamp of the battery itself; in order to perform the reset, it is advisable to disconnect the battery, thus removing power to the sensor, and then reconnect everything after a few minutes.

If the battery error persists, it may be necessary to use a specific diagnostic software to reset the error light.


Posted on 26 July 2025 by ScegliAuto


Related tutorials

How to reset the TPMS light on the Fiat 500 X
How to reset the TPMS light on the Fiat 500 X
Fiat 500 (2014-2022 / 500 X) The tire pressure warning light activates when it is necessary to adjust the pressure; after updating the tire pressure, following the guidelines ind…
Where is the temperature sensor on the Fiat 500?
Where is the temperature sensor on the Fiat 500?
Fiat 500 (2007-2024 / 312) In this video, you will see where the coolant temperature sensor is located on a Fiat 500 or even on a 500 Abarth; the sensor's position is the same.…
How to replace the steering torque sensor in the Fiat 500
How to replace the steering torque sensor in the Fiat 500
Fiat 500 (2007-2022 / ) Below are the main instructions that will allow you to remove and replace the steering torque sensor in the Fiat 500, in simple and quick steps. Firs…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos