Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the steering torque sensor in the Fiat 500

Model: Fiat 500 - Years 2007-2022

Below are the main instructions that will allow you to remove and replace the steering torque sensor in the Fiat 500, in simple and quick steps. First, disconnect the battery; then get inside the vehicle and remove the steering wheel along with its airbag, disconnecting the electrical connector and unscrewing the central nut of the steering wheel. At this point, remove the steering torque sensor by disconnecting the electrical wiring; install the new sensor, as well as the original, following the reverse procedure of disassembly!

Updated on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

General guidelines for replacing the steering angle sensor on Fiat 500 cars.
General guidelines for replacing the steering angle sensor on Fiat 500 cars.
Fiat 500 (2012-2023 / 500 L) In this video we see a common problem with Fiat 500: it happens that when steering, the steering wheel stiffens. This is due to the fact that a senso…
How to identify the external temperature sensor of a Fiat 500 L.
How to identify the external temperature sensor of a Fiat 500 L.
Fiat 500 (2012-2023 / 500 L) Let's see how to replace the external temperature sensor of the Fiat 500. It is a small protrusion located at the bottom of the right side mirror of …
How to reset the battery sensor of the Fiat 500 1.2
How to reset the battery sensor of the Fiat 500 1.2
Fiat 500 (2007-2024 / 312) In this guide we will see the instructions on how to reset the battery sensor of the Fiat 500 1.2. First of all, we open the engine hood and locate t…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2022 - Where is the USB port fuse located on a Fiat 500? Read answer
    • 500 2007-2024 - What happens when the "uconnect" on Fiat 500 expires? Read answer
    • 500 2007-2024 - Where is the jack on the Fiat 500? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos