Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel on Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Door trim panel

Here's how to remove the plastic panel covering the right front door on a Fiat 500: disconnect the battery terminals located in the engine bay (if you need to disconnect various terminals), use a screwdriver to unscrew the screws located in the space of the upper door opening lever and the screws present in the handle. Detach the securing clips and with your hands, disconnect the panel from the door (disconnect the power wiring and the opening cable). If necessary, remove the adhesive covering: unscrew the appropriate screws securing the speaker. Refit everything in reverse order.

Updated on 5 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Door Panel on the Fiat 500 X
How to Remove the Front Door Panel on the Fiat 500 X
Fiat 500 (2014-2022 / 500 X) In this guide, see the steps that will allow you to remove and replace the front door panel on the Fiat 500 X. First, open the front door and start b…
Remove the Left Door Panel on Fiat 500
Remove the Left Door Panel on Fiat 500
Fiat 500 (1957-1975 / Epoca) Begin by removing the left door panel on the Fiat 500 (old model): use a screwdriver to unscrew the securing screws located in the handle, remove the…
How to Remove the Door Panel of a Fiat 500
How to Remove the Door Panel of a Fiat 500
Fiat 500 (2007-2021 / 312) Before you start, open the door of your Fiat 500. Begin by prising off and removing the frame of the internal door handle. Next, remove the inserts f…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos