Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the tire pressure warning light on the Fiat Panda

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part:

Below we will see the instructions that will allow us to reset the tire pressure warning light of the Fiat Panda; before performing the TPMS sensor reset, it is necessary that all four tires are at the correct pressure. So, get into the car and start the instrument panel; then use the arrow buttons and the set button located under the radio to go to the settings of the onboard computer, until you reach the tire pressure option. Press and hold the set button to reset the TPMS warning!

Posted on 11 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Tyre Pressure Warning Light on a Fiat Panda
Resetting the Tyre Pressure Warning Light on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) In this video tutorial, you will learn how to reset the tyre pressure warning light on a Fiat Panda. Before resetting the warning light, it is necess…
Resetting the Tyre Pressure Light on a Fiat Panda
Resetting the Tyre Pressure Light on a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) What to do if a light appears? Let’s see how to reset the tyre pressure light on a Fiat Panda. To reset the tyre pressure light: turn on the ignition…
Resetting the Tyre Pressure Light on Fiat Panda
Resetting the Tyre Pressure Light on Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) This very simple procedure can be performed on Fiat Panda and similar vehicles to reset the tyre pressure warning light. Use the selection buttons lo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos