Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the steering wheel of the Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Steering wheel

Today's instructions will allow us to disassemble and replace the steering wheel and its airbag in the Fiat 500. First, we get into the car and start unscrewing the fastening screws that we find at the bottom of the plastic cover behind the steering wheel; then we disconnect the electrical connector of the airbag located on the back, as shown in the video. At this point, we unscrew the central screw of the steering wheel, moving the steering wheel control cables to remove it; replace it if necessary with the new one, reassembling and electrically connecting the steering wheel airbag!

Posted on 21 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Steering Wheel from a Fiat 500
How to Remove the Steering Wheel from a Fiat 500
Fiat 500 (2007-2021 / 312) Before starting, sit in the driver's seat of your Fiat 500. Begin by unscrewing and removing the screws that secure the airbag to the steering wheel,…
Removing the Steering Wheel from a Fiat 500
Removing the Steering Wheel from a Fiat 500
Fiat 500 (2007-2021 / 312) How to remove the steering wheel from a Fiat 500? Here’s how to detach the steering wheel and airbag. Insert a screwdriver into the slots at the back…
How to Remove and Replace the Steering Wheel on a Fiat 500
How to Remove and Replace the Steering Wheel on a Fiat 500
Fiat 500 (2007-2024 / 312) How to remove the steering wheel on a Fiat 500? Let's see in this video how to proceed: before removing the airbag from the steering wheel, disconnec…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2014-2022 - What to do when the steering of the Fiat 500 is locked? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos