Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the oil change light on a Fiat 500.

Model: Fiat 500 312 - Years 2007-2024
Part: Service warning light

Unfortunately, you have changed the oil in your car but the warning light does not turn off. Don't worry because the reset is very simple and does not require any special procedures. Get in the car, close the door, and turn the key without starting the engine. Press the accelerator all the way down three times in a row within ten seconds. Turn everything off, wait a moment, and then turn the ignition back on. The warning light should have disappeared, if it is still there, try again calmly and repeat the entire procedure. If you still can't do it, take a look at the car manual or ask for the help of an expert. If you don't feel comfortable doing these procedures yourself, contact a specialized workshop.

Posted on 23 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2014-2022 / 500 X) In this short video guide, we see the essential steps and tools to use for a maintenance service of the Fiat 500, including changing the engine oil, …
Fiat 500 (2014-2022 / 500 X) In this video tutorial, learn how to reset the maintenance warning light for the oil change on the Fiat 500 X. First, get inside the vehicle and conn…
Fiat 500 (2007-2021 / 312) Today, you will learn the main instructions to reset the oil change maintenance light on a Fiat 500; the reset operation does not require any specifi…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos