Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How to remove the speaker in the door panel on Smart Fortwo

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Door panel
Operation: How to remove the speaker in the door panel on Smart Fortwo

How to remove the door panel on a Fiat 500? Let's see together how to proceed. Before starting the disassembly work, let's disconnect the battery terminals in the engine compartment. Let's start the disassembly: with a lever remove the plastic cover of the door opening lever, then, with a screwdriver, we go to unscrew the tightening screws placed in the handle. Once all the screws have been removed, with the lever we remove all the plastic clips that block the door. We detach the door panel with our hands, unhook any power supply terminals and release cable. We carry out the necessary maintenance in the door.


Posted on 3 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • 500 2007-2023 - Why won't the trunk of the Fiat 500 open? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos