Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Fiat
  4. :
  5. Multipla
  6. : How to remove the EGR valve mounted on a Fiat Multipla

Fiat Multipla - Video tutorial

Model: Fiat Multipla MK 1 - Years 1998-2010
Part: EGR valve
Operation: How to remove the EGR valve mounted on a Fiat Multipla

How to remove the EGR valve mounted on a Fiat Multipla? Lift the bonnet and put it in safety, then, with a screwdriver, unscrew the locking pins of the ventilation pipe (we remove the engine soundproofing panel), remove the engine soundproofing panel. We begin to disassemble the locking pins of the EGR valve (as in the video), if we have problems: we lift the car with a jack and proceed to disassemble the piece from below. Once the piece has been disassembled from its seat, let's unscrew the screws on it with a screwdriver. We begin to clean the valve with the help of a product suitable for cleaning mechanical parts, we use a brush to facilitate operations. We reassemble the whole after cleaning.


Posted on 5 November 2023 by ScegliAuto



How to replace the timing belt on Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) How to replace the timing belt on a Fiat Multipla engine? We lift the car on a column or jack bridge (if necessary, we disassemble the front wheel, w
How to remove the battery of a Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) Before starting, we will have to open the front hood of our Fiat Multipla by pulling the special opening handle, positioned at the bottom left of the
Where is it and how to reach the cigarette lighter fuse of a Fiat Multipla?
Fiat Multipla (1998-2010 / MK 1) The cigarette lighter fuse of our Fiat Multipla is located inside the fuse box. In turn, the fuse box is located inside the upper left side of the da

Other guides that may interest you

How do you open the fuel flap of the Volkswagen Golf 5?

In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism.

Watch the video!


by ScegliAuto

More videos