Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light in the Fiat 500 Abarth?

Model: Fiat 500 312 - Years 2007-2024
Part: Service warning light

It is very easy to turn off the service light on the Fiat 500 Abarth, the car shown in the video uploaded here. You can do it independently and in a very short time by following these steps: turn on the instrument panel, press the accelerator pedal three times in a row, and then turn off the panel. The procedure is complete, and to confirm the reset, turn the panel back on and check that the anomaly is no longer active. However, be careful, resetting the warning in question should be the completion of the scheduled maintenance work. All the planned interventions must be carried out.

Posted on 12 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Fiat 500 Abarth
Fiat 500 (2007-2022 / 312) Below, we will see how to reset the service light for the engine oil change on the Fiat 500 Abarth. First, get into the vehicle and connect your diag…
Resetting the Service Light on the Fiat 500 Abarth Display
Fiat 500 (2012-2023 / 500 L) Before proceeding with the service light reset, position your Fiat 500 on a flat surface (or on a ramp, but this is excessive) to ensure the operator…
Removing the Boot Handle of a Fiat 500 Abarth
Removing the Boot Handle of a Fiat 500 Abarth
Fiat 500 (2007-2021 / 312) In this video tutorial, you will learn how to remove the boot handle of a Fiat 500 Abarth, as well as the standard Fiat 500. First, open the boot lid…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos