Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire warning light on a Fiat 500.

Model: Fiat 500 312 - Years 2007-2024
Part:

In this video tutorial, you can observe the procedure to reset the tire warning light on a Fiat 500 car. First of all, get inside the vehicle and turn on the instrument panel, but you won't need to start the engine. Use the buttons on the steering wheel to navigate through the menu settings and select the option "reset TPMS" or "tire pressure reset." At this point, select and confirm the reset by pressing OK and holding it down for a few seconds. Finally, turn off the instrument panel and turn it back on to check the outcome of the procedure.

Posted on 16 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Reset Tyre Pressure Light on Fiat 500
Reset Tyre Pressure Light on Fiat 500
Fiat 500 (2007-2021 / 312) Today, you will learn how to reset the tyre pressure light on a Fiat 500. Before performing the operation, ensure that any issues related to the pres…
How to Reset the Tyre Warning Light on a Fiat 500
How to Reset the Tyre Warning Light on a Fiat 500
Fiat 500 (2007-2021 / 312) Before starting, sit in the driver's seat of your Fiat 500. Turn the key in the ignition to the first position to activate the instrument cluster. Ne…
How to Reset the Tyre Pressure Light on a Fiat 500?
How to Reset the Tyre Pressure Light on a Fiat 500?
Fiat 500 (2014-2022 / 500 X) Resetting the tyre pressure light is quite easy in a Fiat 500. Once inside the vehicle, press the start/stop button to turn on the ignition without s…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos