Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the drums and brake shoes of the rear brakes on the Fiat Seicento.

Model: Fiat Seicento MK 1 - Years 1998-2010
Part: Brake drums and shoes

In this guide, we will discover the procedure for disassembling and replacing the drum and rear brake shoes of the Fiat Seicento. First, we raise the vehicle and begin by removing the rear wheel; then we proceed to unscrew the central nut of the drum to remove it, as shown in the video. At this point, we remove the brake shoes by disconnecting them from the springs; we clean the brake caliper of any residual dirt, and then install the new original brake shoes. Finally, we just need to reassemble and securely fasten the drum, and then reinstall the wheel.

Posted on 22 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the rear brake shoes of the Fiat Seicento
Replacement of the rear brake shoes of the Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) Today we will see, in this video tutorial, how to disassemble and replace the rear brake shoes of a Fiat Seicento, in simple and quick steps. First w…
Fiat Seicento drum brake replacement
Fiat Seicento drum brake replacement
Fiat Seicento (1998-2010 / MK 1) This video will show you how to replace the rear brakes on the Fiat Seicento. The first step will be to lift the car with the jack in such a way as t…
How to replace the fuel pump of the Fiat Seicento
How to replace the fuel pump of the Fiat Seicento
Fiat Seicento (1998-2010 / MK 1) Today we will see, in this video tutorial, the main steps that will allow us to disassemble and replace the fuel pump of the Fiat Seicento. First of …

How to Replace the Window Switch Button on a Mercedes C-Class

How do you remove the window switch button located in the driver side door panel of a Mercedes C-Class? This video explains how to proceed. Before starting the disassembly, disconnect the battery terminals in the engine compartment (if you need to disconnect electrical connectors). Use a plastic trim tool to pry between the button and the plastic of the switch panel. Once you have removed the button from the switch panel, install the new button inside (push and lock it into the designated plastic). Test the button to ensure it functions correctly.

Watch the video!


by ScegliAuto

More videos