Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Oil and Filter on a Fiat Panda

Model: Fiat Panda 319, MK 3 - Years 2012-2026
Part: Engine oil

Do you want to change the oil and filter on a Fiat Panda (new model)? Follow this guide: lift the bonnet and secure it, then raise the car on a column lift or jack; unscrew the oil sump plug: let the fluid drain into a disposal container and re-screw the oil sump plug. Using a strap wrench, unscrew the oil filter and remove it (fit the new part). Finally, top up with new oil; measure the oil level multiple times with the dipstick (metal) until you reach the ideal measurement.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil Filter on a Fiat Panda 1.3 Multi-Jet
How to Replace the Engine Oil Filter on a Fiat Panda 1.3 Multi-Jet
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, open the bonnet of your Fiat Panda 1.3 Multi-Jet. The oil filter is located near the oil filler neck. Begin by loosening the oi…
Engine Oil Replacement for Fiat Panda
Engine Oil Replacement for Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Replace the oil and filter on a Fiat Panda. Start by opening the car door and pulling up the engine compartment release lever located at the bottom l…
How to Replace Engine Oil and Filter on a Fiat Panda
How to Replace Engine Oil and Filter on a Fiat Panda
Fiat Panda (1980-2003 / 141, MK 1) Today, I will show you how to change the engine oil and filter on your Fiat Panda. It is not a very complex operation; just be careful, and you can d…

    Frequently Asked Questions

    • Panda 2003-2012 - How much engine oil does the fuel tank of the Panda 1 2 petrol contain? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos