Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil Filter on a Fiat Panda 1.3 Multi-Jet

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Oil filter

Before you can start, open the bonnet of your Fiat Panda 1.3 Multi-Jet. The oil filter is located near the oil filler neck. Begin by loosening the oil filter cap using a 27 mm socket. Then, remove the cap along with the oil filter. This will give you access to the oil filter itself. Proceed to extract it from its housing, completing the removal. To fit the new oil filter, follow these steps in reverse, and you will have completed the replacement.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil and Oil Filter on the Fiat Panda 169 4x4
How to Replace the Engine Oil and Oil Filter on the Fiat Panda 169 4x4
Fiat Panda (2003-2012 / 169, MK 2) Let’s discover the procedure to perform routine maintenance by replacing the engine oil and oil filter on the Fiat Panda 169 4x4. First, lift the veh…
How to Replace the Filters in the Fiat Panda
How to Replace the Filters in the Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) In this video tutorial, see how to replace the filters in the Fiat Panda. First, lift the car using a lift or hydraulic jack. Place a container under…
How to Replace the Oil Filter on a Fiat Panda 1.3 MultiJet?
How to Replace the Oil Filter on a Fiat Panda 1.3 MultiJet?
Fiat Panda (2012-2026 / 319, MK 3) In this detailed tutorial, you will see how to replace the oil filter on a Fiat Panda 1.3 MultiJet. First, drain the oil completely by lifting the di…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos