Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the service light in a Fiat 500?

Model: Fiat 500 312 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

When your Fiat 500 reaches the scheduled mileage set by the manufacturer, you need to take care of the service, the periodic maintenance we are all familiar with, including oil change, filters, spark plugs, and so on. The execution of these tasks can be done either as a DIY project or in a workshop, and if we opt for the second solution, the reset of the service light would occur using professional equipment connected to the car's control unit via the OBD port.

The configuration of the car model is completed in a short time, access is gained to the Active Alarms section, and the warning is then turned off.


Posted on 17 January 2026 by ScegliAuto


Related tutorials

Fiat 500 (2014-2022 / 500 X) In this brief video guide, follow the essential steps and tools required for a service on the Fiat 500, including engine oil change, oil filter, and …
Fiat 500 (2014-2022 / 500 X) In order to reset the Service light of the Fiat 500X, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can be found on…
Fiat 500 (2007-2024 / 312) To make the Service light disappear from the instrument panel of the Fiat 500, you will need to turn on the instrument panel by turning the key insid…

    Frequently Asked Questions

    • 500 2007-2022 - What does the coupon expired warning light on the Fiat 500 mean? Read answer
    • 500 2007-2022 - What does the service light indicate in the FIAT 500? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the engine oil light on the Fiat 500? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos