Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil light on the Fiat Ducato

Model: Fiat Ducato X250 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

To reset the oil warning light related to the oil change on a Fiat Ducato Multijet vehicle, we need to turn on the instrument panel and press the accelerator pedal while simultaneously keeping the brake pedal pressed. Press the brake pedal three times in a row, then release both pedals and turn off the instrument panel; wait a few seconds and turn the instrument panel back on. If the warning light continues to flash on the instrument panel after these steps, it is necessary to go to a workshop for a diagnostic check, as the oil tank sensor may not have detected the amount of oil inside, causing the light to flash.


Posted on 21 January 2026 by ScegliAuto


Related tutorials

Reset Service Light on Fiat Ducato
Reset Service Light on Fiat Ducato
Fiat Ducato (2006-2014 / X250) Let's go through the steps to reset the service light for the routine maintenance oil change on a Fiat Ducato. First, turn on the ignition and fully …
Reset Service Light on Fiat Ducato
Reset Service Light on Fiat Ducato
Fiat Ducato (2002-2006 / ) In today's video tutorial, you will learn how to reset the service light for routine maintenance on a Fiat Ducato. First, get inside the vehicle and …
Resetting Service Light on Fiat Ducato
Resetting Service Light on Fiat Ducato
Fiat Ducato (2006-2014 / X250) In this video tutorial, you will learn how to reset the service light for the regular maintenance oil change on a Fiat Ducato. First, get inside the …

    Frequently Asked Questions

    • Ducato 2014-2026 - How to reset the service warning light on Fiat Ducato? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos