Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Service Light on Fiat Ducato

Model: Fiat Ducato X250 - Years 2006-2014
Part: Service warning light

Let's go through the steps to reset the service light for the routine maintenance oil change on a Fiat Ducato. First, turn on the ignition and fully press the accelerator pedal, holding it down for thirty seconds; then, while keeping the accelerator pressed, press the brake pedal seven times, as shown in the video. At this point, turn off the ignition and turn it back on while still holding the accelerator pedal; as soon as the light stops flashing, you can release everything and start the engine!

Updated on 6 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the service light on a Fiat Ducato
Resetting the service light on a Fiat Ducato
Fiat Ducato (1981-1993 / MK 1) Hello! Today we will explain how to reset the service light on a Fiat Ducato. It is important to remember that this step should only be done after pe…
How to Reset the Service Light on a Fiat Ducato?
Fiat Ducato (2006-2014 / X250) On the Fiat Ducato, to reset the Service light, insert the ignition key into the ignition switch and turn it to power on the instrument cluster. Once…
How to reset the Service light on the Fiat Ducato?
How to reset the Service light on the Fiat Ducato?
Fiat Ducato (2014-2026 / X290) To reset the Service light on the Fiat Ducato, start by turning on the instrument cluster and turning the key in the ignition switch. Once the cluste…

Other guides you may be interested in

    Frequently Asked Questions

    • Ducato 2014-2026 - How to reset the service warning light on Fiat Ducato? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos