Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Air filter replacement on a Fiat 500L

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2023
Part: Air filter
Operation: Air filter replacement on a Fiat 500L

Today we are going to see how to replace the air filter of our Fiat 500. We will need a few tools, just a few screwdrivers and a number 10 "T" wrench, first we open the bonnet and remove the mask where it is. It is written "Multijet" by unscrewing the three wrench bolts 10 that hold it attached, after that we would have access to the filter compartment of the area, now we unscrew all the bolts of the filter cover (in total there are 6) so we would have access to the filter of the air, take out the old one and insert the new one, after which we can first screw in the bolts of the filter cover of the area and then the mask.


Posted on 12 November 2023 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2021 - Where is the cabin filter located in the Fiat 500? Read Answer
    • 500 2014-2022 - Where is the Fiat 500x cabin air filter located? Read Answer
    • 500 2014-2022 - Costs for replacing engine and passenger compartment air filters for Fiat 500 x mjt? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos