Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Filter on Fiat 500L

Model: Fiat 500 500 L - Years 2012-2023
Part: Cabin air filter

Do you want to replace the cabin air filter on the Fiat 500L? Here’s how to remove the filter from the glove compartment. Open the front glove box, unclip the plastics of the drawer and lower it down. Locate the plastics covering the cabin air filter. Unscrew the filter cover (where the air filter is located). Once the screws are removed, take off the cap from the filter housing, then extract the worn cabin filter. Insert a new cabin filter, refit the cover cap of the filter housing and tighten the screws. Reinstall the glove box into the dashboard after completing the installation.

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Air Filter on a Fiat 500L
How to Replace the Cabin Air Filter on a Fiat 500L
Fiat 500 (2012-2023 / 500 L) In this short video, we will see how to remove and replace the cabin air filter on a Fiat 500L in simple and quick steps. First, get inside the vehic…
Replacing the cabin filter on Fiat 500L
Replacing the cabin filter on Fiat 500L
Fiat 500 (2012-2023 / 500 L) On the Fiat 500L, the cabin air filter, or pollen filter, is located behind the glove compartment. Open the glove box and empty it completely. Remove…
Replacing the Cabin Filter of the Fiat 500L
Replacing the Cabin Filter of the Fiat 500L
Fiat 500 (2012-2023 / 500 L) To proceed with the replacement of the cabin filter on the Fiat 500L, follow these steps: Open the passenger side door and open the glove compartment…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos