Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : Fiat 500 l cabin filter replacement

Fiat 500 - Video tutorial

Model: Fiat 500 500 L - Years 2012-2023
Part: Cabin air filter
Operation: Fiat 500 l cabin filter replacement

To replace the cabin filter on the Fiat 500L, proceed as follows: Open the passenger side flap and open the glove box located under the passenger side dashboard. Tilt the glove compartment completely and with your hand access the compartment below. Remove the cover door from the filter compartment and access the filter itself. Take out the filter and remove the new one (always check the coding of the type of filter which must be compatible with the car model). Place the new filter in its housing and refit the cover, then close the glove compartment.


Posted on 17 December 2022 by ScegliAuto

    Frequently Asked Questions

    • 500 2012-2023 - Where is the cabin air filter located in the 2014 Fiat 500L? Read Answer
    • 500 2012-2021 - Where is the pollen filter located in the Fiat 500 L? Read Answer
    • 500 2014-2022 - Where is the cabin filter located in the Fiat 500X? Read Answer
    • 500 2014-2022 - Where is the cabin air filter located on the Fiat 500X? Read Answer
    • 500 2014-2022 - Where is the Fiat 500x cabin air filter located? Read Answer
    • 500 2014-2022 - Where is the pollen filter on the Fiat 500X located? Read Answer
    • 500 2012-2023 - Where is the pollen filter of the Fiat 500L located? Read Answer
    • 500 2014-2022 - Where is the pollen filter on the Fiat 500x located? Read Answer
    • 500 2014-2022 - Where is Fiat 500 x cabin air filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos