Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Air Filter on a Fiat Panda 3

Model: Fiat Panda 319, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Air filter

See other generations:
Video tutorial

To independently replace the engine air filter on your Fiat Panda third generation, follow these steps. First, fully lift the front bonnet of the vehicle and ensure the engine is not hot. Then locate the box containing the air filter and unscrew all the screws of the cover using a suitable manual or battery-operated screwdriver.

Next, remove the protective cover and proceed to replace the filter. Finally, refit the cover and screw all the screws back in.


Posted on 25 March 2026 by ScegliAuto


Related tutorials

How to Remove the Air Filter on a Fiat Panda
How to Remove the Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before starting, open the bonnet of your Fiat Panda to gain access to the engine bay. Begin by unfastening the securing clips of the air filter cover…
How to Remove the Air Filter on a Fiat Panda
How to Remove the Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, open the bonnet of your Fiat Panda to access the engine bay. Begin by unfastening the clips that secure the air filter cover. T…
How to Replace the Engine Air Filter on a Fiat Panda
How to Replace the Engine Air Filter on a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) How do you replace the engine air filter on a Fiat Panda? Follow these steps: open the car door, pull up the engine compartment release lever located…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos