Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Maintenance Light (Service) on a Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Service warning light

Below, we will discover the instructions that will allow us to reset the ordinary maintenance light (service) on a Fiat 500. In this case, a specific diagnostic tool is used, which must be connected to the OBD port of the control unit; turn on the instrument cluster to enable communication with the engine control unit. At this point, select the make and model of the vehicle, following the guided procedure to confirm and execute the reset of the maintenance key and the service mileage counter; finally, disconnect the tool and start the engine!

Posted on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Fiat 500
Fiat 500 (2007-2021 / 312) In this video, see how to reset the service light for routine maintenance on the Fiat 500 0.9 TwinAir; this procedure can be applied to all vehicles …
How to Reset the Maintenance Light on a Fiat 500
How to Reset the Maintenance Light on a Fiat 500
Fiat 500 (2007-2024 / 312) In this guide, you will learn how to reset the maintenance light on a Fiat 500. First, get inside the cabin and press the accelerator pedal fully thr…
How to Reset Service Light on Fiat 500
How to Reset Service Light on Fiat 500
Fiat 500 (2007-2021 / 312) How to reset the maintenance light on a Fiat 500? Check how to reset the light from above the instrument cluster. Enter the cabin and turn on the ins…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2014-2022 - What does the oil warning light indicate in the Fiat 500X? Read answer
    • 500 2014-2022 - How to reset the service warning light on the Fiat 500X? Read answer
    • 500 2007-2024 - How to reset the Abarth 595 Service warning light? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos