Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset the Inspection Light on a Fiat Doblò

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Service warning light

Today's instructions will show you how to reset the inspection light (service) on a Fiat Doblò. First, get into the vehicle and press and hold the accelerator pedal fully; then turn on the ignition by turning the key to position one, and press the brake pedal seven times, as shown in the video. At this point, hold the accelerator pedal for another twenty seconds, release it, and then turn off the ignition; restart the engine and check that the service light has reset correctly!

Posted on 15 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting the Service Light on the Fiat Doblò
Resetting the Service Light on the Fiat Doblò
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) This guide provides instructions to reset the service light for the routine maintenance oil change on the Fiat Doblò. First, get inside the vehicle a…
How to Reset the Service Light on the Fiat Doblò
How to Reset the Service Light on the Fiat Doblò
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) In today's video tutorial, you will see how to reset the maintenance light for the engine oil change on the Fiat Doblò, following the instructions be…
How do you reset the Service light on the Fiat Doblò?
How do you reset the Service light on the Fiat Doblò?
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) In order to reset the Service light on the Fiat Doblò, you need to connect a diagnostic tool to the OBD port of the vehicle: this port is located on …

Other guides you may be interested in

    Frequently Asked Questions

    • Doblo 2009-2021 - What does the flashing oil warning light mean in Fiat Doblò? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos