|
Do it yourself
| |||
| ||||
How to Remove the EPS on a Fiat Punto
Model: Fiat Punto
MK 2, 188
- Years 1999-2011
How to remove the EPS on a Fiat Punto? Follow these steps. Before removing the steering wheel, disconnect the battery power cables. Use a screwdriver and the appropriate insert to unscrew the steering wheel cover plastics, then remove the airbag by unscrewing the screws present. Once the airbag is removed, disconnect the power terminals, then unscrew the central torx pin of the steering wheel and disconnect the power terminals. Pull the steering wheel off by hand after marking the tightening position with a marker. Now that you have removed the steering wheel, extract the indicator stalk from the steering column and remove all plastics leading to the pedals. Remove the EPS from its housing (unscrew all the fastening pins).
Updated on 10 March 2026 by ScegliAuto
Video tutorial
Related tutorials
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
This guide provides step-by-step instructions for removing the EPS column from the Fiat Grande Punto, as well as the Punto Evo. First, open the front…
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
This tutorial video shows how to remove the EPS and steering column from the Fiat Grande Punto, as well as from the Punto Evo. First, get inside the …
Fiat Punto
(2005-2018 /
MK 3, Punto EVO, 199, Grandepunto )
Removing the front headlamp of the Fiat Punto is very simple. Follow this tutorial applicable to the second and third series Punto. For this operatio…
Other guides you may be interested in
|
Frequently Asked QuestionsWhere is the Fuel Filter Located in a Volvo XC60?
In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.189
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |