Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Maintenance Indicator on a Fiat Freemont

Model: Fiat Freemont MK 1 - Years 2011-2016
Part: Warning light – error code

Learn how to reset the service maintenance indicator on a Fiat Freemont. This operation is very simple: enter the vehicle, turn on the ignition (you will see the maintenance warning light illuminated), and press the accelerator pedal three times. Turn off the ignition with the button, then turn it back on and check the current status of the service light. Once in the maintenance reset, you can set the mileage and reset (if input is required). Always remember to make changes to the onboard computer while the vehicle is stationary and turned off.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Freemont (2011-2016 / MK 1) Resetting the service light related to the car service on a Fiat Freemont diesel vehicle is a simple and quick operation to be carried out independen…
Fiat Freemont (2011-2016 / MK 1) In this video, learn how to reset the oil maintenance service on a Fiat Freemont. This operation is very simple. Enter the vehicle and turn on the in…
Fiat Freemont (2011-2016 / MK 1) This video illustrates the procedure for resetting the service light on the Fiat Freemont. This procedure is useful after performing maintenance, as …

Other guides you may be interested in

    Frequently Asked Questions

    • Freemont 2011-2016 - How to reset the service on the Fiat Freemont? Read answer
    • Freemont 2011-2016 - How to reset the Uconnect system in the Fiat Freemont? Read answer
    • Freemont 2011-2016 - What does the red light with the lightning bolt on the Fiat Freemont mean? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos