Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the 2007 Fiat Panda?

Model: Fiat Panda 169, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Service warning light

See other generations:
Video tutorial

In addition to using professional electronic equipment connected via cable to the vehicle's OBD port, there is a simple DIY method to reset the light in question: switch on the ignition, press the accelerator pedal, and simultaneously press the brake pedal seven times in quick succession.

After this, keep both pedals pressed for sixty seconds, then release them and turn off the ignition.

This solution will have cleared the warning, and to confirm, switch on the ignition again and visually check if the light is still active.


Posted on 1 June 2026 by ScegliAuto


Related tutorials

How do you change the motor oil and reset the Service light in the 2016 Fiat Panda?
How do you change the motor oil and reset the Service light in the 2016 Fiat Panda?
Fiat Panda (2012-2023 / ) We all know that at a certain mileage or elapsed time, we need to perform the regular maintenance of the car, such as changing the engine oil, oil fi…
How to cancel the expired service warning on the Fiat Panda?
How to cancel the expired service warning on the Fiat Panda?
Fiat Panda (2012-2026 / 319, MK 3) The expired service message, accompanied by the warning light on the Fiat Panda, is a programmed reminder that indicates the need for regular mainten…
How to Reset the Service Light on Fiat Panda 1.3 MultiJet
How to Reset the Service Light on Fiat Panda 1.3 MultiJet
Fiat Panda (2003-2012 / 169, MK 2) In today's video, you will reset the service light for the regular oil change maintenance on a Fiat Panda 1.3 MultiJet second series, but this also a…

    Frequently Asked Questions

    • Panda 2012-2026 - How do you reset the Fiat Panda Service warning light? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos