Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS Light on a Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part:

To reset the TPMS light on a Fiat 500, first ensure that the tyre pressures match the manufacturer's specifications. Insert the key into the ignition and turn on the instrument panel without starting the engine. Use the buttons on the steering wheel to access the vehicle settings menu. Scroll through the options until you find the section for tyre pressure monitoring and select the reset or save current values option. Confirm the operation when prompted by the display. Once done, turn off the ignition and turn it back on to check that the TPMS light is no longer present on the instrument panel. If necessary, drive a few miles for the system to complete the new calibration.

Posted on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "TPMS" Light on a Fiat 500X
How to Reset the "TPMS" Light on a Fiat 500X
Fiat 500 (2014-2022 / 500 X) Before you begin, sit in the driver's seat of your Fiat 500X. Start by selecting the vehicle settings page using the selection arrows on the steering…
How to Reset the TPMS Light on the 2016 Fiat 500 X
How to Reset the TPMS Light on the 2016 Fiat 500 X
Fiat 500 (2014-2022 / 500 X) Resetting the TPMS light on the 2016 Fiat 500 X follows very simple steps that can be performed independently. The steps to follow are: First, turn o…
How to reset the TPMS light on the Fiat 500
How to reset the TPMS light on the Fiat 500
Fiat 500 (2007-2024 / 312) .. Today we will explain how to reset the TPMS light on a Fiat 500 vehicle. To reset the light, we need to turn on the instrument.. …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos