Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Handbrake on a Fiat Ducato X290

Model: Fiat Ducato X290 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Parking brake

See other generations:
Video tutorial

If the handbrake on the Fiat Ducato X290 (and its siblings Peugeot Boxer/Citroën Jumper) no longer holds the vehicle, often a simple adjustment of the cable is sufficient, without replacing components. The adjuster is located under the vehicle, near the gearbox or under the floor, accessible from below.

Lift the vehicle and locate the handbrake cable: you will notice a threaded rod with an adjustment nut and a lock nut. Loosen the lock nut with a spanner (usually 13 or 15 mm), then adjust the nut to tension the cable. Turn clockwise to tighten, counterclockwise to loosen.

After each adjustment, test the handbrake from the cabin: the lever should have a travel of 3-4 clicks. Once the correct tension is reached, tighten the lock nut to secure the adjustment.

Ensure the rear wheels turn freely with the brake released.


Posted on 13 July 2026 by ScegliAuto


Related tutorials

How to repair and adjust the handbrake of the Fiat Ducato
How to repair and adjust the handbrake of the Fiat Ducato
Fiat Ducato (2014-2026 / X290) Today we will discover the instructions that will allow us to disassemble and repair the handbrake of the Fiat Ducato, as well as the RAM Promaster, …
How to Reset the Service Light on a Fiat Ducato X290
How to Reset the Service Light on a Fiat Ducato X290
Fiat Ducato (2014-2026 / X290) If the red oil light is flashing on your Fiat Ducato X290, you need to reset the counter. Here is the manual procedure to reset it without diagnostic…
How to Replace the Handbrake Cable of the Fiat Ducato?
How to Replace the Handbrake Cable of the Fiat Ducato?
Fiat Ducato (2006-2014 / X250) To replace the handbrake cable of the Fiat Ducato, lift the vehicle using a jack so that the rear wheels are not in contact with the ground. Once the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos