Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil and Filter Replacement on Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Engine oil

Let's look at the oil and filter replacement on a Fiat Panda. Lift the bonnet and secure it, then raise the car on a column lift (jack); unscrew the oil sump plug, let the fluid drain into a disposal container, and screw the sump plug back in. Use a strap wrench to unscrew the oil filter and remove it from its housing (fit the new part). Finally, top up with new oil, measuring the level with the dipstick multiple times until the ideal measurement is reached.

Updated on 11 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil Filter on a Fiat Panda 1.3 Multi-Jet
How to Replace the Engine Oil Filter on a Fiat Panda 1.3 Multi-Jet
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, open the bonnet of your Fiat Panda 1.3 Multi-Jet. The oil filter is located near the oil filler neck. Begin by loosening the oi…
Engine Oil Replacement for Fiat Panda
Engine Oil Replacement for Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Replace the oil and filter on a Fiat Panda. Start by opening the car door and pulling up the engine compartment release lever located at the bottom l…
How to Replace the Engine Oil and Oil Filter on the Fiat Panda 169 4x4
How to Replace the Engine Oil and Oil Filter on the Fiat Panda 169 4x4
Fiat Panda (2003-2012 / 169, MK 2) Let’s discover the procedure to perform routine maintenance by replacing the engine oil and oil filter on the Fiat Panda 169 4x4. First, lift the veh…

    Frequently Asked Questions

    • Panda 2003-2012 - How much engine oil does the fuel tank of the Panda 1 2 petrol contain? Read answer

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos