Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuse on a 2015 Fiat 500 Abarth

Model: Fiat 500 312 - Years 2007-2024
Part: Airbag

Today, you will learn how to replace the airbag fuse on a 2015 Fiat 500 Abarth. Before starting the fuse replacement, it is important to disconnect the car battery at least one hour before the intervention. The fuse is located inside the box under the dashboard on the driver's side. Using needle-nose pliers, remove the worn fuse and insert the new fuse, maintaining the same amperage, which in this case is 7.5 Amperes. After the replacement, reconnect the negative terminal of the battery to restore the electrical circuit. If an error code appears on the display, it is necessary to go to a workshop for a diagnostic check, as improper airbag function could prevent it from working during an accident.

Posted on 28 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD port located on the 2017 Fiat 500 Abarth?
Fiat 500 (2007-2024 / 312) Being able to independently locate the OBD port inside your 2017 Fiat 500 Abarth can be difficult as the OBD port in question is well hidden inside t…
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
How to Replace the Front Headlight Bulb of the Fiat 500 Abarth
Fiat 500 (2007-2024 / 312) Replacing a front headlight bulb on a Fiat 500 Abarth follows the same steps used for replacing a front headlight bulb on a Fiat 500 or Fiat 500 L. T…
How to Remove and Replace the Rear Light of the Fiat 500 Abarth
How to Remove and Replace the Rear Light of the Fiat 500 Abarth
Fiat 500 (2007-2021 / 312) In today's video tutorial, you will learn how to remove and replace the rear light of the Fiat 500 Abarth, following the instructions below. First, o…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos