Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Unscrew the Engine Oil Sump Plug on a Fiat Panda

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: Engine oil

If you need to carry out maintenance by replacing the engine oil, you will need a 12 mm Allen key. The oil drain plug is located at the rear of the sump and usually, due to repeated thermal cycles, tends to seize in place. It is advisable to use a lever to support the key during removal. At the end of the oil draining process, it is recommended to replace the plug or at least the sealing washer with one made of copper or aluminium, ensuring proper torque during tightening.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Engine Oil Replacement for Fiat Panda
Engine Oil Replacement for Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Replace the oil and filter on a Fiat Panda. Start by opening the car door and pulling up the engine compartment release lever located at the bottom l…
How to Change the Engine Oil and Filter in a Fiat Panda
How to Change the Engine Oil and Filter in a Fiat Panda
Fiat Panda (2012-2026 / 319, MK 3) To replace the engine oil and filter in a Fiat Panda, park the vehicle on a flat surface and safely lift it to access the underside of the engine. Po…
How to Replace the Engine Oil in a Fiat Panda
How to Replace the Engine Oil in a Fiat Panda
Fiat Panda (2003-2012 / 169, MK 2) Before you can start, open the front bonnet of your Fiat Panda. Begin by unscrewing and removing the top cap where the engine oil is added, then lift…

Other guides you may be interested in

    Frequently Asked Questions

    • Panda 2003-2012 - How much engine oil does the fuel tank of the Panda 1 2 petrol contain? Read answer

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos