Do it yourself
Frequently asked questions about cars and motorcycles

Where is the OBD Port on the Fiat 500?

Model: Fiat 500 312 - Years 2007-2024
Part: Checks and maintenance

In this guide, we will describe the few simple steps you need to follow to quickly find the OBD port on your new Fiat 500. Before you start, ensure that the vehicle is parked safely and completely turned off. Then, go to the driver's seat and locate and remove the plastic panel on the side of the dashboard. After removing the panel, locate the OBD port you were looking for and, if necessary, connect a diagnostic tool to analyse the data recorded in the vehicle's ECU.

Posted on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2007-2024 / 312) Being able to independently locate the OBD port inside your 2017 Fiat 500 Abarth can be difficult as the OBD port in question is well hidden inside t…
Fiat 500 (2007-2024 / 312) In the following guide addressed to those of you who own the new Fiat 500, we will explain step by step where the car's OBD port is located and how y…
Fiat 500 (2007-2024 / 312) If you do not yet know where the OBD port of your new Fiat 500 is located, do not worry because thanks to the simple procedure described below, you w…

Other guides you may be interested in

    Frequently Asked Questions

    • 500 2007-2022 - What does the parking assistance not available on the Fiat 500 mean? Read answer
    • 500 2007-2022 - Why does the trunk of the Fiat 500C not open? Read answer
    • 500 2007-2022 - How much does the panoramic roof cost in the Fiat 500? Read answer
    • 500 2007-2024 - Why is the USB port of the Fiat 500 not working? Read answer
    • 500 2007-2024 - What does the message "Start & Stop not available" mean in the Fiat 500? Read answer
    • 500 2014-2022 - In what position is the passenger compartment filter on the Fiat 500x? Read answer
    • 500 2012-2023 - What does "Anomaly P2930" mean on a Fiat 500L? Read answer
    • 500 2007-2024 - Why does the Fiat 500 Start & Stop not work? Read answer
    • 500 2014-2022 - What does the wording "Service expired" on the Fiat 500X mean? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos