Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of a Fiat 500

Model: Fiat 500 312 - Years 2007-2024
Part: Tail light bulb

In this video, learn how to remove the rear light of a Fiat 500 and replace the bulbs. Open the boot lid, and using a screwdriver, unscrew the securing screws located at the side of the light. Disconnect the rear light from its housing once all screws are removed (disconnect the power connectors) and replace the damaged bulbs with new ones (same size and voltage). Finally, refit the light and reconnect the power connectors (tighten the screws at the sides of the light). Test the correct operation of the previously installed bulbs.

Updated on 13 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Rear Light on a Fiat 500 Abarth
Removing Rear Light on a Fiat 500 Abarth
Fiat 500 (2012-2023 / 500 L) How to remove the rear light on a Fiat 500 Abarth? Here’s how to disassemble the light. Lift the tailgate, unscrew the securing screws on the side of…
How to Remove and Replace the Rear Light of the Fiat 500 Abarth
How to Remove and Replace the Rear Light of the Fiat 500 Abarth
Fiat 500 (2007-2021 / 312) In today's video tutorial, you will learn how to remove and replace the rear light of the Fiat 500 Abarth, following the instructions below. First, o…
Removing the Rear Light on a Fiat 500
Removing the Rear Light on a Fiat 500
Fiat 500 (2007-2021 / 312) Is the rear light on your Fiat 500 broken? Here’s how to remove the rear light. Lift the boot of the luggage compartment, unscrew the securing screws…

    Frequently Asked Questions

    • 500 2007-2024 - How many reversing lights are there on the Fiat 500? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos