Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Air Filter on Fiat Bravo

Model: Fiat Bravo Bravo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Air filter

See other generations:
Video tutorial

To replace the air filter in the Fiat Bravo, locate the air filter housing. Prepare to remove the plastic cover at the bottom of the bumper using an appropriate screwdriver with a socket (remove the round piece).

After removing the housing, take out the filter from inside and fit a new one (same size and type). Refit the plastic cover under the car's bumper with the associated screws.

Lower the car to the ground after reassembly. Test the car's operation by starting the engine.

Use specific filters.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

Replacing the Cabin Air Filter on a Fiat Bravo
Replacing the Cabin Air Filter on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) In this video tutorial, you will learn how to remove and replace the cabin air filter of a second series Fiat Bravo. The air filter is located at the…
How to Replace the Air Filter on the Fiat Bravo
How to Replace the Air Filter on the Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) Unlike many other car models on the market, the air filter on the Fiat Bravo is not located in the engine bay but underneath the vehicle. Therefore, …
Change the Air Conditioning Filter on a Fiat Bravo
Change the Air Conditioning Filter on a Fiat Bravo
Fiat Bravo (2007-2014 / Bravo 2) How do you replace the cabin air filter on a Fiat Bravo? Follow these steps to replace it. Open the front door and, using a lever, remove the plastic…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos