Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing the Battery in a Fiat Freemont and Dodge Journey

Model: Fiat Freemont MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Battery

Video tutorial

In this video, see how to change the battery in the Fiat Freemont and Dodge Journey. The two cars have the same system and components, so proceed with the disassembly; remember that the battery is located in a different position compared to other common cars, which may require some extra steps.

You will need to lift the vehicle to access it. The battery is located inside the left front wheel arch, so you need to remove the arch by taking off the snap caps. Then, use a tool to lever off the arch.

Disconnect the battery support and the terminals to remove it.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

How to Change the Key Battery of the Dodge Journey
How to Change the Key Battery of the Dodge Journey
Fiat Freemont (2011-2016 / MK 1) Replacing the battery of the key fob with a keyless system for the Dodge Journey, the American sibling of the Fiat Freemont, is very simple and can b…
How to Replace the Windscreen Washer Pump on the Fiat Freemont - Dodge Journey
How to Replace the Windscreen Washer Pump on the Fiat Freemont - Dodge Journey
Fiat Freemont (2011-2016 / MK 1) This short and simple guide outlines the steps to remove and replace the windscreen washer pump on the Fiat Freemont and Dodge Journey. First, open t…
How to Remove the Front Door on a Fiat Freemont - Dodge Journey
How to Remove the Front Door on a Fiat Freemont - Dodge Journey
Fiat Freemont (2011-2016 / MK 1) This video shows how to remove the front door on a Fiat Freemont and Dodge Journey, following the instructions below. First, open the front door and …

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos