Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fiat Multipla Service Light Reset

Model: Fiat Multipla MK 1 - Years 1998-2010
Part: Service warning light

In this video, you will learn how to reset the "service" light for periodic maintenance on a second-generation Fiat Multipla. First, press the mod button and enter the menu: then search for scheduled maintenance. Press the mod button again and go to maintenance: at this point, you need to press both the plus and minus buttons simultaneously for at least 10 seconds. Now press the mod button again and you will be back at scheduled maintenance (usually at 20,000 kilometres). If the vehicle has a DPF (diesel particulate filter), you also need to reset the control unit.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Fiat Multipla Service warning light?
How do you reset the Fiat Multipla Service warning light?
Fiat Multipla (1998-2010 / MK 1) To reset the Fiat Multipla Service warning light, turn on the instrument panel and press the button under the rev counter, in correspondence with the…
Replacing the rear light bulb on the Fiat Multipla
Replacing the rear light bulb on the Fiat Multipla
Fiat Multipla (1998-2010 / MK 1) Let's find out today the procedure that will allow us to disassemble and replace the rear light bulb of the Fiat Multipla. First of all, we open the …
Where is the OBD port of the Fiat Multipla located?
Where is the OBD port of the Fiat Multipla located?
Fiat Multipla (1998-2010 / MK 1) If you own a Fiat Multipla and want to locate the OBD port of the vehicle, all you have to do is carefully read the following guide and follow the st…

Other guides you may be interested in

How to Replace the Rear Light and Bulbs on a Ford Focus Year 2000

To replace the rear light and bulbs on a Ford Focus 2000/2004, first, open the tailgate of the boot. This gives access to the screw that holds the rear light in place. The screw to undo (using an appropriate screwdriver) is located inside the light and corresponds to the fold that accommodates the tailgate (as shown in the images). Once you start to undo it, continue with the operation and then remove the nut from the inside of the bodywork. At this point, you can remove the light, being careful to disconnect the electrical supply by unplugging the connectors or removing the entire bulb holder from its housing. This way, you can replace the bulbs. To reassemble everything, simply follow the described operations in reverse order.

Watch the video!


by ScegliAuto

More videos