|
Do it yourself
| |||
| ||||
How to clean a diesel particulate filter with Wurt cleaner
Model: Fiat Tipo
358, 356, 357
- Years:
2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Video tutorial
The DPF traps fine particles from the diesel engine. In short urban driving conditions, autonomous regenerations may stop, causing blockages. Action is required when warning lights are illuminated or if you notice a loss of power; for preventive maintenance during the service and if insufficient regenerations are detected, which could lead to very costly damage. Here’s the cleaning procedure. You need to remove the air filter (in this case, we are talking about a Fiat Tipo) and disconnect the DPF pressure/temperature sensor. Remember that the temperature of the filter must be below 50°C (check with a thermometer), and always use protective equipment (gloves, goggles, and a mask). For this purpose, use the Wurt cleaner for diesel particulate filters, which can be found on the eshop.wurt.it website with the EAN code 4050641544117. Insert the probe into the hole of the sensor you previously unscrewed, spray the product with up/down movements for even distribution; allow it to act for a few minutes to dissolve the particulate. Refit the sensor applying copper grease to the threads for future interventions. After cleaning, a static regeneration (like in the video) or dynamic regeneration with a road trip is necessary.
Posted on 31 January 2026 by ScegliAuto
Related tutorials
Fiat Tipo
(2016-2026 /
358, 356, 357)
In this tutorial, you will see how to replace the cabin filter in the Fiat Tipo, a very simple and quick operation. First, sit in the passenger seat,…
Fiat Tipo
(2016-2026 /
358, 356, 357)
As shown in the video, to replace the LPG filter on a Fiat Tipo, first obtain a new filter and remove the old one with the vehicle turned off and col…
Fiat Tipo
(2016-2026 /
358, 356, 357)
In this video, learn how to clean the intake system of a Fiat Tipo: you will need a specific cleaner as recommended by the YouTuber, which can be fou…
Other guides you may be interested in
|
How to Remove the Toll Tag Holder from the Car Windscreen
The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.077
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |