Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to regenerate the particulate filter of the Fiat Doblo

Model: Fiat Doblo 263, Doblo 2, MK 2 - Years 2009-2021
Part: Diesel particulate filter

Today we will show you how to regenerate the particulate filter on a Fiat Doblò. Get on board the vehicle and place your feet on the brake and accelerator pedals, pressing them down all the way. Start the engine and let the RPMs increase by pressing on the pedals. Release the pedals when the FAP filter light starts flashing on the instrument panel. Leave the engine running while waiting for the message "filter regenerated" to appear on the display. Only then turn off and on the vehicle to check that the light is off and the filter has been regenerated.

Posted on 29 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the DPF Warning Light on the Fiat Doblo
How to Reset the DPF Warning Light on the Fiat Doblo
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) Resetting the DPF warning light on the 2018 Fiat Doblo is necessary when the diesel particulate filter fails to regenerate automatically. To proceed …
How to perform DPF regeneration on a Fiat Doblò
How to perform DPF regeneration on a Fiat Doblò
Fiat Doblo (2009-2021 / 263, Doblo 2, MK 2) In this video, we will see how to perform forced DPF regeneration on a Fiat Doblò: when it reaches about half temperature, rev the engine, then turn …
How to Replace the Diesel Filter on the Fiat Doblò 1.3
How to Replace the Diesel Filter on the Fiat Doblò 1.3
Fiat Doblo (2000-2009 / 223, MK 1, Doblo 1) Follow these instructions to remove and replace the diesel filter on the Fiat Doblò 1.3. First, open the bonnet of the vehicle and start unscrewing a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos