Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the DPF Warning Light on the Fiat Doblo

Model: Fiat Doblo MK 2, Doblo 2, 263 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Warning light – error code

See other generations:
Video tutorial

Resetting the DPF warning light on the 2018 Fiat Doblo is necessary when the diesel particulate filter fails to regenerate automatically. To proceed with the reset, first turn on the ignition while fully pressing the accelerator pedal.

The display will show "Initiating automatic DPF regeneration"; immediately release the pedal and wait for the regeneration to complete. Once regeneration is complete, you can turn off the vehicle and restart it; you will notice that the warning light has turned off.


Updated on 5 September 2026 by ScegliAuto


Related tutorials

How to perform DPF regeneration on a Fiat Doblò
How to perform DPF regeneration on a Fiat Doblò
Fiat Doblo (2009-2021 / MK 2, Doblo 2, 263) In this video, we will see how to perform forced DPF regeneration on a Fiat Doblò: when it reaches about half temperature, rev the engine, then turn …
How to reset the tire pressure light on the Fiat Doblò
How to reset the tire pressure light on the Fiat Doblò
Fiat Doblo (2022-2026 / Doblo -3) Below we will see the necessary instructions in order to reset the tire pressure warning light of the Fiat Doblò; before performing the TPMS reset, i…
How do you reset the tire pressure warning light on the Fiat Doblò?
How do you reset the tire pressure warning light on the Fiat Doblò?
Fiat Doblo (2022-2026 / Doblo -3) In order to reset the tire pressure warning light of the Fiat Doblò, you will need to inflate the tires until they reach the recommended pressure val…

    Frequently Asked Questions

    • Doblo 2009-2021 - How to reset the radio of the Fiat Doblò? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos