Do it yourself
Frequently asked questions about cars and motorcycles

How to Clean the Intake System of a Fiat Tipo

Model: Fiat Tipo 356, 357, 358 - Years 2016-2026
Part: Checks and maintenance

In this video, learn how to clean the intake system of a Fiat Tipo: you will need a specific cleaner as recommended by the YouTuber, which can be found on eBay with code 122038641334 for £45.90, with free delivery. First, disconnect the battery, remove the air hoses by unscrewing clamps and bolts, disconnect the MAF sensors, and detach the intercooler. Start the engine and let it warm up for 2-3 minutes, then spray the cleaner directly into the intake duct while the engine is running, using a tube to reach critical points. Occasionally rev the engine to expel dirt, which may come out forcefully. Turn off the engine and reassemble all the hoses, then take a drive to burn off any residues in the exhaust.

Posted on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Fiat Tipo (2016-2026 / 356, 357, 358) Follow these simple and quick steps to remove and replace the engine air filter on the Fiat Tipo. First, open the bonnet and start by loosening the c…
Fiat Tipo (2016-2026 / 356, 357, 358) In this tutorial, you will see how to replace the cabin filter in the Fiat Tipo, a very simple and quick operation. First, sit in the passenger seat,…
Fiat Tipo (2016-2026 / 356, 357, 358) Before you start, check and, if necessary, adjust the pressure in the tyres, then sit in the driver's seat of your Fiat Tipo. Start the engine. Next,…

Other guides you may be interested in

    Frequently Asked Questions

    • Fiat Tipo 2016-2026 - The Start and Stop system no longer works on my Fiat Tipo, what could it be? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos