Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Mass Air Flow Sensor from the Fiat Panda 2 (169) 1.2 8V

Model: Fiat Panda 169, MK 2 - Years 2003-2012
Part: MAF sensor

In this video tutorial, you will learn how to remove and clean the mass air flow sensor from the Fiat Panda second series (169) with a 1.2 8-valve engine. First, open the bonnet and start by removing the air filter box and the intake hose by unscrewing the screws; disconnect the hose located under the air filter box, as shown in the video. At this point, disconnect the electrical connector of the mass air flow sensor, which is located next to the throttle body, to remove it and clean it using appropriate degreasers.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Wiper Arms on the Fiat Panda 169
Removing the Wiper Arms on the Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) In this tutorial, learn how to remove the front wiper arms and the scuttle panel on the Fiat Panda 169, as well as the Punto, in simple steps. First,…
Replacing the Door Lock on a Fiat Panda 169
Replacing the Door Lock on a Fiat Panda 169
Fiat Panda (2003-2012 / 169, MK 2) Discover the procedure to remove and replace the door lock cylinder on the front door of a Fiat Panda 169, second series. First, open the front door …
How to Replace the Drive Shaft on a Fiat Panda 169 4x4
How to Replace the Drive Shaft on a Fiat Panda 169 4x4
Fiat Panda (2003-2012 / 169, MK 2) Discover in this video the instructions for replacing the drive shaft on a Fiat Panda 169 4x4. First, lift the vehicle and position the jack under th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos