Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Light Switch on a Fiat Grande Punto

Model: Fiat Punto MK 3, Punto EVO, 199, Grandepunto - Years 2005-2018
Part: Steering wheel

Decide to replace the light switch controls behind the steering wheel for various reasons, including components that require inspection or replacement. This guide shows you how to disassemble the entire unit. In this video, we will not consider removing the steering wheel, as it has already been taken off. From the underside of the steering wheel, remove all the screws holding the lower plastic cover in place, followed by the upper cover. Now, open the cable ties and then loosen the central screw that secures the entire electronic control block.

Updated on 18 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Indicator Stalk on Fiat Punto Evo
How to Remove the Indicator Stalk on Fiat Punto Evo
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) The failure of the indicator stalk, particularly the flat cable inside, is a common fault on this car model, resulting in the airbag warning light il…
No Need to Replace the Indicator Stalk on the Fiat Grande Punto
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) The issue with the indicator stalk on the Grande Punto is quite common, and mechanics and the manufacturer suggest replacing it. However, this interv…
How to Disassemble the Dashboard of a Fiat Grande Punto?
How to Disassemble the Dashboard of a Fiat Grande Punto?
Fiat Punto (2005-2018 / MK 3, Punto EVO, 199, Grandepunto ) To disassemble the dashboard of a Fiat Grande Punto, loosen the screws located at the back of the steering wheel so that the front airbag can be remo…

Other guides you may be interested in

    Frequently Asked Questions

    • Punto 1999-2011 - Why does the power steering of the Fiat Punto fail? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos