Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the indicator stalk of the Fiat Grande Punto

Model: Fiat Punto 199, MK 3, Grandepunto , Punto EVO - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Dashboard

See other generations:
Video tutorial

In this video tutorial, you can see how to repair the indicator stalk of the Fiat Grande Punto. First, get into your vehicle and remove the airbag.

Once the airbag is removed, you can also take off the steering wheel if you wish; be careful as there are only six screws to remove, so use a small hex key. Now, apply a little pull to remove the cover. The cover above is even simpler as there are only two screws.

To remove the steering wheel, unscrew a single bolt using the appropriate tool. Mark the position with a marker for later reinstallation.

Now remove the steering wheel. Next, loosen the collar clamp with the hex key. You can now remove the indicator stalk from its housing.


Updated on 19 June 2026 by ScegliAuto


Related tutorials

No Need to Replace the Indicator Stalk on the Fiat Grande Punto
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) The issue with the indicator stalk on the Grande Punto is quite common, and mechanics and the manufacturer suggest replacing it. However, this interv…
How to Replace the Stalk Switches in a Fiat Grande Punto?
How to Replace the Stalk Switches in a Fiat Grande Punto?
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) To replace the stalk switches in the Fiat Grande Punto, first loosen the screws located at the back of the steering wheel, on both the right and left…
How to Remove the Indicator Stalk on Fiat Punto Evo
How to Remove the Indicator Stalk on Fiat Punto Evo
Fiat Punto (2005-2018 / 199, MK 3, Grandepunto , Punto EVO) The failure of the indicator stalk, particularly the flat cable inside, is a common fault on this car model, resulting in the airbag warning light il…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos